| 1 | Secondary hardening in an Cr-Mo-V steel: Effect of thermal cycle tempering | Coautor: Vergara-Hernández, HJ, Díaz-Villaseñor, PG, Vázquez-Gómez, O, Garnica-González, P, et al. | 2024 | MATERIALS SCIENCE AND TECHNOLOGY | WoS-id: 001224947600001
Scopus-id: 2-s2.0-85195684690
| 0 | 0 |
| 2 | Effect of the Heating Rate on the Austenite Formation Kinetics by Isoconversion Method in Cr?Mo?V Steel | Coautor: Vergara-Hernández H.J., Guzman-Garfias R., Vázquez-Gómez O., Garnica-González P., et al. | 2024 | Minerals Metals & Materials Series | WoS-id: 001316143700150
Scopus-id: 2-s2.0-85185718586
| 0 | 1 |
| 3 | Low hydrogen pressure effect over microhardness and impact toughness of an experimental X-120 microalloyed steel | Coautor: Vergara-Hernandez, Hector J., Del-Pozo, Adrian, Villalobos, Julio C., Bedolla-Jacuinde, Arnoldo, et al. | 2023 | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | WoS-id: 000960007700001
Scopus-id: 2-s2.0-85150336203
| 2 | 2 |
| 4 | Analysis of in situ gas nitriding by dilatometry of porous Ti6Al4V materials | Coautor: Vergara-Hernández H.J., Mihalcea E., Olmos L., Farias I., et al. | 2022 | Journal Of Thermal Analysis And Calorimetry | WoS-id: 000639747500003
Scopus-id: 2-s2.0-85104240825
| 0 | 0 |
| 5 | Effect of the Ag addition on the compressibility, sintering and properties of Ti6Al4V/xAg composites processed by powder metallurgy | 2ᵒ autor: Vergara-Hernández H.J., Solorio V.M., Olmos L., Bouvard D., et al. | 2022 | JOURNAL OF ALLOYS AND COMPOUNDS | WoS-id: 000706712600001
Scopus-id: 2-s2.0-85114137761
| 15 | 15 |
| 6 | Kinetic Study of Oxide Growth at High Temperature in Low Carbon Steel | 2ᵒ autor: Vergara-Hernández H.J., Arreola-Villa S.A., Solorio-Diáz G., Pérez-Alvarado A., et al. | 2022 | METALS | WoS-id: 000758826300001
Scopus-id: 2-s2.0-85122851629
| 10 | 12 |
| 7 | Application of a Non-Isothermal Numerical-Analytical Model to Determine the Kinetics of Austenite Formation in a Silicon Alloyed Steel | Coautor: Vergara-Hernández H.J., Gallegos-Pérez A.I., Vázquez-Gómez O., Herrejón-Escutia M., et al. | 2022 | Materials | WoS-id: 000762774700001
Scopus-id: 2-s2.0-85124697264
| 0 | 1 |
| 8 | Effect of Cold-rolling and Heating Rate on Austenite Formation in a Low-Carbon Steel | Coautor: Vergara-Hernández H.J., Alanis-Fuerte I., Garnica-González P., Lopez-Martínez E., et al. | 2022 | ISIJ INTERNATIONAL | WoS-id: 000778737700027
Scopus-id: 2-s2.0-85124796620
| 4 | 4 |
| 9 | Effect of the thermal field on the microstructure of dissimilar welded joints between TWIP steel and 2205 duplex stainless steel | Coautor: Vergara-Hernandez, Hector-Javier, Garcia-Garcia, Victor, Frasco-Garcia, O. D., Reyes-Calderon, Francisco, et al. | 2022 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | WoS-id: 000780212500005
Scopus-id: 2-s2.0-85139524774
| 10 | 13 |
| 10 | Improving Selectivity on High-Temperature Decarburization Depth Measurements using an Image Segmentation Method | Coautor: Vergara-Hernández H.J., Chávez-Campos G.M., Reyes-Archundia E., Vázquez-Gómez O., et al. | 2022 | OXID MET | WoS-id: 000801071300001
Scopus-id: 2-s2.0-85130744763
| 1 | 1 |
| 11 | Hydrogen gaseous embrittlement effect over mechanical properties of an experimental X-120 microalloyed steel subjected to heat treatments and different cooling rates | Coautor: Vergara-Hernandez, Hector J., Villalobos, Julio C., Del-Pozo, Adrian, Vázquez-Gómez O., et al. | 2022 | INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | WoS-id: 000865427000005
Scopus-id: 2-s2.0-85135776665
| 4 | 4 |
| 12 | Corrosion susceptibility behavior in 12Cr?1Mo martensitic stainless steel welded by SAW process and the effect of d-ferrite in the HAZ | Coautor: Vergara-Hernández H.J., Alcantar-Mondragón N., Reyes-Calderón F., Villalobos J.C., et al. | 2022 | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | Scopus-id: 2-s2.0-85130856251
| 0 | 4 |
| 13 | X-ray Computed Microtomography Characterization of Ti6Al4V/CoCrMo Biomedical Composite Fabricated by Semi-solid Sintering | 2ᵒ autor: Vergara-Hernandez, H. J., Mihalcea, E., Olmos, L., Jimenez, O., et al. | 2021 | JOURNAL OF NONDESTRUCTIVE EVALUATION | WoS-id: 000606451300002
Scopus-id: 2-s2.0-85098493941
| 3 | 4 |
| 14 | Application of a new reagent for analysis of oxygen presence in a low-carbon steel wire rod | 2ᵒ autor: Vergara-Hernández H.J., Dávila-Pérez M.I., Vázquez-Gómez O., Reyes-Calderón F., et al. | 2021 | J IRON STEEL RES INT | WoS-id: 000620419700003
Scopus-id: 2-s2.0-85101211814
| 0 | 0 |
| 15 | Numerical simulation of wire rod cooling in eutectoid steel under forced-convection | 2ᵒ autor: Vergara-Hernández H.J., López-Cornejo M.S., Arreola-Villa S.A., Vázquez-Gómez O., et al. | 2021 | METALS | WoS-id: 000622768600001
Scopus-id: 2-s2.0-85099822955
| 6 | 8 |
| 16 | Design and characterization of Ti6Al4V/20CoCrMo-highly porous Ti6Al4V biomedical bilayer processed by powder metallurgy | 2ᵒ autor: Vergara-Hernandez, H. J., Mihalcea, E., Jimenez, O., Olmos, L., et al. | 2021 | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | WoS-id: 000630205900013
Scopus-id: 2-s2.0-85101023889
| 16 | 17 |
| 17 | Study of cracking susceptibility in similar and dissimilar welds between carbon steel and austenitic stainless steel through finger test and FE numerical model | Coautor: Vergara-Hernández H.J., Alcantar-Modragón N., García-García V., Reyes-Calderón F., et al. | 2021 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | WoS-id: 000672293600002
Scopus-id: 2-s2.0-85110805637
| 7 | 8 |
| 18 | Design of architectured Ti6Al4V-based materials for biomedical applications fabricated via powder metallurgy | Coautor: Vergara-Hernández H.J., Olmos L., Mihalcea E., Bouvard D., et al. | 2021 | Materials Today Communications | WoS-id: 000718045600004
Scopus-id: 2-s2.0-85118483523
| 6 | 9 |
| 19 | Dilatometric Analysis of Tempering Kinetics in a Cr?Mo?V Medium-Carbon Steel | Coautor: Vergara-Hernández H.J., Barrera-Villatoro E.F., Vázquez-Gómez O., Gallegos-Pérez A.I., et al. | 2021 | Minerals Metals & Materials Series | WoS-id: 000851234200075
Scopus-id: 2-s2.0-85104410012
| 1 | 1 |
| 20 | Thermal and Mechanical Characterization of Non-isothermal Tempering of an Experimental Medium-Carbon Steel | Coautor: Vergara-Hernandez, H. J., Diaz-Villasenor, P. G., Vazquez-Gomez, O., Gallegos-Perez, I, A., et al. | 2021 | Minerals Metals & Materials Series | WoS-id: 000851234200076
Scopus-id: 2-s2.0-85104426087
| 0 | 0 |
| 21 | Characterization of Ti6Al4V?Ti6Al4V/30Ta Bilayer Components Processed by Powder Metallurgy for Biomedical Applications | Coautor: Vergara-Hernández H.J., Chávez J., Jiménez Alemán O., Flores Martínez M., et al. | 2020 | METALS AND MATERIALS INTERNATIONAL | WoS-id: 000519274000006
Scopus-id: 2-s2.0-85067850460
| 10 | 12 |
| 22 | An ohmic heating model based on the thermal circuit method: Case of study for parameter determination | Coautor: Vergara-Hernández H.J., Chávez-Campos G.M., Téllez-Anguiano A.D.C., Salazar-Torres J.A., et al. | 2020 | J THERM SCI ENG APPL | WoS-id: 000525402700015
Scopus-id: 2-s2.0-85107299315
| 3 | 3 |
| 23 | Evaluation of Corrosion Susceptibility of Conventional Dual-Phase Steels Used in the Automotive Industry | Coautor: Vergara-Hernández H.J., Vences-Hernández R., Reyes-Calderón F., Villalobos J.C., et al. | 2020 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | WoS-id: 000577513500001
Scopus-id: 2-s2.0-85092492065
| 3 | 5 |
| 24 | Criteria for the dilatometric analysis to determine the transformation kinetics during continuous heating | Coautor: Vergara-Hernandez, H. J., Vazquez-Gomez, O., Gallegos-Perez, A. I., Lopez-Martinez, E., et al. | 2019 | Journal Of Thermal Analysis And Calorimetry | WoS-id: 000462553400008
Scopus-id: 2-s2.0-85048737801
| 13 | 15 |
| 25 | Dilatometric model for determining the formation of austenite during continuous heating in medium carbon steel | Coautor: Vergara-Hernández H.J., Herrejón-Escutia M., Solorio-Díaz G., López-Martínez E., et al. | 2019 | Journal Of Thermal Analysis And Calorimetry | WoS-id: 000470329700005
Scopus-id: 2-s2.0-85058083617
| 8 | 8 |
| 26 | Effect of Silicon Content on the Dilatometric Behavior of a Medium-Carbon Steel | Coautor: Vergara Hernández H.J., Gallegos Pérez A.I., Vázquez Gómez O., López Soria J.J., et al. | 2019 | Minerals Metals & Materials Series | WoS-id: 000560397400130
Scopus-id: 2-s2.0-85064853712
| 2 | 2 |
| 27 | HYDROGEN ASSISTED CRACKING IN A MICROALLOYED STEEL SUBJECTED TO A RAPID THERMAL CYCLE AT HIGH TEMPERATURE | Coautor: Vergara-Hernandez, H. J., Lopez-Martinez, E., Vazquez-Gomez, O., Campillo, B. | 2018 | ARCHIVES OF METALLURGY AND MATERIALS | WoS-id: 000432340700043
Scopus-id: 2-s2.0-85079292214
| 2 | 2 |
| 28 | Numerical simulation of a metallic load in continuous movement during heating in an experimental vertical-type furnace | Coautor: Vergara-Hernández H.J., Arreola-Villa S.A., Solorio-Díaz G., Vázquez-Goméz O. | 2018 | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | WoS-id: 000434450600005
Scopus-id: 2-s2.0-85046687611
| 6 | 6 |
| 29 | Parameter optimization: Force (F), time (T) and current intensity (I), in the RSW welding process of DP-290 steel plates using the taguchi method | Coautor: Vergara-Hernández H.J., Reyes-Calderón F., Vences-Hernández R., Salazar-Torres J.A., et al. | 2018 | SOLDAGEM & INSPECAO | WoS-id: 000446592400004
Scopus-id: 2-s2.0-85062856684
| 2 | 3 |
| 30 | Fluid dynamics around flat-end cylindrical quench probes under isothermal and non-isothermal conditions | Coautor: Vergara-Hernandez, H. J., Cervantes-Garcia, A., Solorio-Diaz, G., Hernandez-Morales, B. | 2018 | REVISTA MEXICANA DE INGENIERIA QUIMICA | WoS-id: 000446943500026
Scopus-id: 2-s2.0-85053080972
| 0 | 1 |
| 31 | Sintering study of Ti6Al4V powders with different particle sizes and their mechanical properties | Coautor: Vergara-Hernández H.J., Cabezas-Villa J.L., Lemus-Ruiz J., Bouvard D., et al. | 2018 | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS | WoS-id: 000452499400004
Scopus-id: 2-s2.0-85058846628
| 37 | 41 |
| 32 | Mathematical modeling of the thermal response of laboratory-scale probes | Coautor y autor de correspondencia: Vergara-Hernandez, H. J., Hernandez-Morales, B., Cruces-Resendez, R. | 2018 | Materials Performance And Characterization | WoS-id: 000486161800001
Scopus-id: 2-s2.0-85054537286
| 0 | 0 |
| 33 | Investigation of the effect of inert inclusions on densification during solid-state sintering of metal matrix composites | Coautor: Vergara-Hernández H.J., Cabezas J.L., Olmos L., Garnica P., et al. | 2017 | SCI ENG COMPOS MATER | WoS-id: 000409485000014
Scopus-id: 2-s2.0-85029218407
| 3 | 4 |
| 34 | Analyzing the compressive behavior of porous Ti6Al4V by X-ray microtomography | Coautor: Vergara-Hernández H.J., Farias I., Olmos L., Jimenez O., et al. | 2017 | MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | WoS-id: 000415103400008
Scopus-id: 2-s2.0-85033693878
| 4 | 5 |
| 35 | Constrained sintering and wear properties of Cu-WC composite coatings | Coautor: Vergara-Hernández H.J., Cabezas-Villa J.L., Olmos L., Jiménez O., et al. | 2017 | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | WoS-id: 000415685000010
Scopus-id: 2-s2.0-85032891618
| 27 | 29 |
| 36 | Failure of stainless steel welds due to microstructural damage prevented by in situ metallography; | Coautor: Hernandez H.V., Lopez J.M.S., Alvarado M.I., Quiroz J.T.P., et al. | 2016 | SOLDAGEM & INSPECAO | WoS-id: 000389609000003
Scopus-id: 2-s2.0-84981731295
| 2 | 2 |
| 37 | Caracterización de la aleación Ni53.5-Fe19.5-Ga27 con memoria de forma ferromagnetica producida por metalurgia de polvos | Coautor: Vergara-Hernandez H.J., Olmos L., Alvarado-Hernandez F., Jimenez O., et al. | 2015 | REVISTA DE METALURGIA | WoS-id: 000356832600001
Scopus-id: 2-s2.0-84936817240
| 0 | 1 |
| 38 | Numerical modelling of dissipation phenomena in a new ladle shroud for fluidynamic control and its effect on inclusions removal in a slab tundish | Coautor: Vergara-Hernández H.J., Solorio-Diaz G., Davila-Morales R., De Jesus Barreto-Sandoval J., et al. | 2014 | STEEL RESEARCH INTERNATIONAL | WoS-id: 000335578700013
Scopus-id: 2-s2.0-84899822782
| 19 | 26 |
| 39 | Characterization of constrained sintering of powders on solid substrate | Coautor: Vergara Hernandez H.J., Olmos L., Lemus-Ruiz J., Jimenez O., et al. | 2014 | Advanced Materials Research | Scopus-id: 2-s2.0-84902168171
| 0 | 0 |
| 40 | Characterization of constrained sintering of powders on solid substrate | Coautor: Vergara Hernandez H.J., Olmos L., Lemus-Ruiz J., Jimenez O., et al. | 2014 | Materials Science Forum | Scopus-id: 2-s2.0-84904573603
| 0 | 1 |
| 41 | A novel probe design to study wetting front kinematics during forced convective quenching | 1ᵉʳ autor: Vergara-Hernandez, HJ, Hernandez-Morales, B | 2009 | EXPERIMENTAL THERMAL AND FLUID SCIENCE | WoS-id: 000267178100002
Scopus-id: 2-s2.0-67349173534
| 24 | 37 |
| 42 | A Sample Size Statistical Analysis and Its Impact on Decarburization Measurements Metrics | Coautor: Vergara-Hernández H.J., Chávez-Campos G.M., Reyes-Archundia E., Vázquez-Gómez O., et al. | | JOM | WoS-id: 000658693900002
Scopus-id: 2-s2.0-85107596016
| 3 | 3 |
ID's SCOPUS 