JULIO ALBERTO JUAREZ ISLAS



DATOS GENERALES
Nombre completo   JULIO ALBERTO JUAREZ ISLAS
Máximo nivel de estudios   POSDOCTORADO
Antigüedad académica en la UNAM   38 años
NOMBRAMIENTOS
Vigente   INVESTIGADOR TITULAR C TC Definitivo
Instituto de Investigaciones en Materiales
Desde 01-01-2008 (fecha inicial de registros en el SIIA)
ESTIMULOS, PROGRAMAS, PREMIOS Y RECONOCIMIENTOS
* SNI Emérito2023 - VIGENTE
* SNI III - 2022
* PRIDE D - 2024
* RDUNJA Innovación tecnológica y diseño industrial1992
* PUN Innovación tecnológica y diseño industrial1999

INFORMACIÓN DE PUBLICACIONES
Firmas  
Alberto Juarez-Islas, Julio Islas J.J. Islas, JAJ Juárez ? Islas J.A. Juarez Islas J.A. Juárez J.
Juarez J.A. Juarez, J. A. Juarez, JA Juárez-Islas J. Juarez-Islas J.A. Juarez-Islas J.J.
Juarez-Islas, J. Juarez-Islas, J. A. Juarez-Islas, JA Juarez-Lslas J.
ID's SCOPUS  
56013833900 56436146200 55750308100 7003357606
Áreas de conocimiento  
Biophysics Chemistry, multidisciplinary Chemistry, physical Electrochemistry Engineering, chemical
Engineering, industrial Engineering, manufacturing Engineering, mechanical Engineering, multidisciplinary History and philosophy of science
Jcs 2008 Materials science Materials science, coatings & films Materials science, coatings and films Materials science, characterization & testing
Materials science, characterization and testing Materials science, multidisciplinary Metallurgy & metallurgical engineering Metallurgy and metallurgical engineering Physics, applied
Physics, condensed matter Physics, multidisciplinary Polymer science Scie jcr Thermodynamics
Atomic and Molecular Physics, and Optics Biophysics Chemical Engineering (miscellaneous) Chemistry (miscellaneous) Electrochemistry
Energy (miscellaneous) Engineering (miscellaneous) Materials chemistry Materials Science (miscellaneous) Mechanical Engineering
Mechanics of Materials Medicine (miscellaneous) Metals and Alloys Physics and Astronomy (miscellaneous) Polymers and Plastics
Safety, risk, reliability and quality Surfaces, Coatings and Films
Coautorías con entidades de la UNAM  
  • Centro de Ciencias Aplicadas y Desarrollo Tecnológico
  • Centro de Física Aplicada y Tecnología Avanzada
  • Instituto de Astronomía
  • Instituto de Física
  • Instituto de Investigaciones en Materiales
  • Instituto de Ciencias Físicas
  • Facultad de Ciencias
  • Facultad de Ingeniería
  • Facultad de Química
  • Facultad de Odontología
  • Dirección General de Servicios de Cómputo Académico
  • Dirección General de Asuntos del Personal Académico
Revistas en las que ha publicado  (71):
  1. 4TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCE, Reino Unido (2015, 2017, 2021, 2022)
  2. ACTA MATERIALIA, Estados Unidos America (2016)
  3. ACTA METALL MATER, (1987)
  4. Acta Metallurgica Et Materialia, (1992)
  5. ACTA MICROSCOPICA, Venezuela (2009)
  6. Advanced Materials Research, Alemania (2014)
  7. Advances in Materials Science and Engineering, Estados Unidos America (2019)
  8. American Society Of Mechanical Engineers, Power Division (publication) Pwr, (2004)
  9. APPLIED PHYSICS LETTERS, Estados Unidos America (2001)
  10. Biomacromolecules, Estados Unidos America (2005)
  11. BIOPHYSICAL JOURNAL, Estados Unidos America (2009)
  12. CORROS REV, Reino Unido (1994)
  13. CORROSION SCIENCE, Reino Unido (2008)
  14. CHEMISTRY-A EUROPEAN JOURNAL, Alemania (2011)
  15. DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES, Rumania (2015, 2016)
  16. ENGINEERING FAILURE ANALYSIS, Reino Unido (2005, 2020)
  17. Eurocorr 2004 - European Corrosion Conference: Long Term Prediction And Modelling Of Corrosion, (2004)
  18. Eurocorr 2008 - European Corrosion Congress: Managing Corrosion For Sustainability, Book Of Abstracts, (2008)
  19. HIGH TEMPERATURE MATERIALS AND PROCESSES, Alemania (2001)
  20. INT J CAST METAL RES, Reino Unido (2003)
  21. INT J RAPID SOLIDIF, (1990, 1995)
  22. Intermetallics, Reino Unido (2008)
  23. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, Serbia (2007, 2013, 2015)
  24. IRONMAKING & STEELMAKING, Reino Unido (1999, 2008)
  25. J MATER CHEM, Reino Unido (2010)
  26. J MATER SCI LETT, (1991, 1992, 2001)
  27. JOM, Estados Unidos America (1993)
  28. JOURNAL OF ALLOYS AND COMPOUNDS, Suiza (2010)
  29. JOURNAL OF APPLIED ELECTROCHEMISTRY, Países Bajos (2002)
  30. Journal Of Applied Research And Technology, México (2009, 2023)
  31. JOURNAL OF COLLOID AND INTERFACE SCIENCE, Estados Unidos America (2011)
  32. JOURNAL OF CHEMICAL THERMODYNAMICS, Reino Unido (2009)
  33. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Estados Unidos America (1997, 1999, 2000, 2001, 2002, 2007, 2020, 2023)
  34. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Suiza (1997, 2000, 2003, 2004)
  35. JOURNAL OF MATERIALS RESEARCH, Estados Unidos America (1993, 1999)
  36. JOURNAL OF MATERIALS SCIENCE, Estados Unidos America (1989, 1991, 1992, 1998, 1999)
  37. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, China (1997, 2012)
  38. JOURNAL OF NANO RESEARCH, Suiza (2009)
  39. JOURNAL OF NANOMATERIALS, Estados Unidos America (2013)
  40. JOURNAL OF PHYSICAL CHEMISTRY B, Estados Unidos America (2007, 2008, 2009, 2010)
  41. JOURNAL OF PHYSICAL CHEMISTRY C, Estados Unidos America (2010)
  42. JOURNAL OF PHYSICAL CHEMISTRY LETTERS, Estados Unidos America (2010)
  43. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, Estados Unidos America (1999)
  44. Langmuir, Estados Unidos America (2008)
  45. Light-Weight Alloys For Aerospace Applications Ii, (1991)
  46. MATERIALS CHARACTERIZATION, Estados Unidos America (2009)
  47. MATERIALS LETTERS, Países Bajos (1989, 1992, 1994, 2008, 2020)
  48. Materials Research Society Symposium Proceedings, Estados Unidos America (2001)
  49. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, Brasil (2009)
  50. Materials Science And Engineering, (1988)
  51. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Suiza (1991, 1994, 2000, 2002, 2004, 2005, 2011, 2022)
  52. Materials Science And Technology Conference And Exhibition 2010, Ms And T'10, (2010)
  53. Materials Science Forum, Suiza (2003, 2006, 2007)
  54. Materials Today Communications, Reino Unido (2023, 2024)
  55. METALS, Suiza (2016)
  56. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Estados Unidos America (2003, 2016, 2019)
  57. Metallurgical Transactions A, (1992)
  58. Metallurgical Transactions B (Process Metallurgy), Estados Unidos America (1992)
  59. MODERN PHYSICS LETTERS B, Singapur (2001)
  60. NACE - International Corrosion Conference Series, Estados Unidos America (1996, 2001, 2005, 2008)
  61. NANOSTRUCT MATER, (1996, 1997)
  62. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, Alemania (2000)
  63. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, Reino Unido (2022)
  64. REVISTA MEXICANA DE ASTRONOMIA Y ASTROFISICA, SERIE DE CONFERENCIAS, México (2011)
  65. REVISTA MEXICANA DE FISICA, México (2009, 2012, 2018)
  66. SCRIPTA MATERIALIA, Estados Unidos America (2000, 2003)
  67. Scripta Metallurgica Et Materiala, (1991)
  68. Solidification Of Aluminum Alloys, (2004)
  69. SURFACE & COATINGS TECHNOLOGY, Suiza (1997)
  70. SURFACE ENGINEERING, Reino Unido (2006)
  71. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Países Bajos (2015)


Descargar PDF

Documentos indexados (WoS y Scopus)

# Título del documento Autores Año Revista Fuente Citas WoS Citas Scopus
1Chill-cast solidification of a peritectic Zn-10 Ag (+ 1.0 Mg) bioabsorbable alloy2ᵒ autor: Juárez-Islas J.A., Ramirez-Ledesma A.L., Aburto-Perdomo E., Ruíz-Rodríguez D., et al.2024Materials Today CommunicationsWoS-id: 001316500800001
Scopus-id: 2-s2.0-85202290312
00
2Evaluation of critical temperatures of as-cast Co-based superalloys as a function of alloying elements and their effect on microstructureCoautor: Juárez ? Islas J.A., Ramírez ? Ledesma A.L., Ruíz ? Rodríguez D., Aburto ? Perdomo E., et al.2024Materials Today CommunicationsWoS-id: 001327798500001
Scopus-id: 2-s2.0-85204964333
11
3Influence of Heat and Cryogenic Treatments on the Abrasive Wear Behavior of H13 Tool SteelCoautor: Juarez-Islas, J. A., Lopez-Leyva, A., Luis-Pantoja, G., Mejia-Caballero, I., et al.2023JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: 000926380200002
Scopus-id: 2-s2.0-85147591648
89
4Introducing novel bioabsorbable Zn-Ag-Mg alloys intended for cardiovascular applicationsCoautor: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Roncagliolo-Barrera, P., Alvarez-Perez, M. A., et al.2023Materials Today CommunicationsWoS-id: 001001739000001
Scopus-id: 2-s2.0-85147544673
88
5On the strengthening mechanisms of a Fe- 0.2% C- 0.6% Mn- 0.2% Mo-1.0% Cr steel intended for pipelines applicationsCoautor: Juárez-Islas J.A., Aburto-Perdomo E., Durán-Nuñez A., Ramírez-Ledesma A.L.2023Journal Of Applied Research And TechnologyScopus-id: 2-s2.0-85179453084
00
6Modification of the remaining useful life equation for pipes and plate processing of offshore oil platforms2ᵒ autor y autor de correspondencia: Juárez-Islas J.A., Ramírez-Ledesma A.L.2022PROCESS SAFETY AND ENVIRONMENTAL PROTECTIONWoS-id: 000741149600006
Scopus-id: 2-s2.0-85120325033
45
7Defects induced through rapid solidification in a Co-20 Cr alloyCoautor: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Luna-Manuel, J. C., Lopez, H. F.2022MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000797874200002
Scopus-id: 2-s2.0-85129225222
22
8Evaluation of the martensitic transformation in a rapidly solidified Co - Cr alloy subjected to thermomechanical processing by XRD techniqueCoautor y autor de correspondencia: Juarez-Islas J.A., Luna-Manuel J.C., Ramirez-Ledesma A.L.20224TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEScopus-id: 2-s2.0-85141867815
00
9Thermomechanical and annealing processing effect on a rapid solidified Co-20 wt. % Cr alloyCoautor: Juarez-Islas J.A., Luna-Manuel J.C., Lagar-Quinto S., Ramirez-Ledesma A.L.20214TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEScopus-id: 2-s2.0-85103238134
02
10On the strengthening mechanisms of a cross-Rolled Zn-Based bioabsorbable alloyCoautor: Juárez-Islas J.A., Domínguez-Contreras L.A., Cruz-Herrera G.A., Ramírez-Ledesma A.L.20214TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEScopus-id: 2-s2.0-85103245975
03
11Mechanical properties improvement in an advanced automotive steelCoautor: Juárez-Islas J.A., Duran-Núez A., Aburto-Perdomo E., Hernandez-Garcia P., et al.20214TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEScopus-id: 2-s2.0-85103264243
01
12On the relationship microstructure/properties on yield strength of a Fe-C-Mn steelCoautor: Juarez-Islas J.A., Aburto-Perdomo E., Duran-Nuez A., Ramirez-Ledesma A.L.20214TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEScopus-id: 2-s2.0-85103277464
01
13Corrosion Assessment of an Implantable Dental Co-Cr Alloy in Artificial Saliva and Biocompatibility BehaviorCoautor: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Roncagliolo, P., Alvarez-Perez, M. A., et al.2020JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: 000525726000030
Scopus-id: 2-s2.0-85080873709
1517
14Suppression of interdendritic segregation during welding of a 347 austenitic stainless steel pipe reactorsCoautor y autor de correspondencia: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Acosta-Vargas, L. A.2020ENGINEERING FAILURE ANALYSISWoS-id: 000539217700003
Scopus-id: 2-s2.0-85085272552
1011
15On the Microstructural and Mechanical Behavior of a Fe-0.3C-2.3Mn-0.22Si-0.5Cr-0.13Ti-0.005B Steel Intended for Automotive ApplicationsCoautor: Juarez-Islas J.A., Duran-Nuñez A., Ramirez-Ledesma A.L., Lopez H.2020JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: 000576702100001
Scopus-id: 2-s2.0-85092337050
12
16Influence of cross ? Rolling on the microstructure and mechanical properties of Zn bioabsorbable alloysCoautor: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Dominguez-Contrera, L. A., Paternoster C., et al.2020MATERIALS LETTERSWoS-id: 000576754100012
Scopus-id: 2-s2.0-85089431387
1011
17Effect of isothermal treatment on microstructure and mechanical properties of cold-deformed if steelCoautor: Juarez Islas J.A., Barragan J.L.R., Diaz R.A.R., Ojeda Martinez M.L., et al.2019Advances in Materials Science and EngineeringWoS-id: 000462368000001
Scopus-id: 2-s2.0-85063471252
52
18Constrained Dendritic Growth and Solute Concentration Effects in Rapidly Solidified Co-Cr AlloysCoautor y autor de correspondencia: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Lopez, H. F.2019METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCEWoS-id: 000463991300017
Scopus-id: 2-s2.0-85061632675
33
19Caracterización microestructural de una aleacion Co-20% Cr solidificada en molde metalicoCoautor: Juárez-Islas J.A., Ramírez-Ledesma A.L., López H., Herrera R.2018REVISTA MEXICANA DE FISICAWoS-id: 000427575100004
Scopus-id: 2-s2.0-85043371312
00
20Microstructural Evaluation of Salt Nitrocarburizing H13 Steel as a Function of TimeCoautor y autor de correspondencia: Juarez, J. A., Vazquez, A., Ramirez, A. L.20174TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEWoS-id: 000400609300019
Scopus-id: 2-s2.0-85016282989
12
21Rapid Solidification Effects on the Development of an HCP Matrix in a Co-20Cr AlloyCoautor y autor de correspondencia: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Lopez, H. F.2016METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCEWoS-id: 000375330700005
Scopus-id: 2-s2.0-84964057110
22
22Athermal epsilon-martensite transformation in a Co-20Cr alloy: Effect of rapid solidification on plate nucleationCoautor: Juarez-Islas, J. A., Ramirez-Ledesma, A. L., Lopez-Molina, E., Lopez, H. F.2016ACTA MATERIALIAWoS-id: 000375812100015
Scopus-id: 2-s2.0-84961864409
4144
23Optimized synthesis of a nanostructured Al alloy modified with Cu by mechanical alloying - Microstructureand solubility modelling perspectiveCoautor: Juarez-Islas, J., Molina-Ocampo, A., Rodriguez-Diaz, R. A., Sedano, A., et al.2016DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURESWoS-id: 000378158700030
Scopus-id: 2-s2.0-84977552159
11
24Evaluation of Chill Cast Co-Cr Alloys for Biomedical ApplicationsCoautor y autor de correspondencia: Alberto Juarez-Islas, Julio, Laura Ramirez-Ledesma, Ana, Lopez, Hugo F.2016METALSWoS-id: 000385526800017
Scopus-id: 2-s2.0-84983353615
87
25Corrosion behavior of AlMgSi alloy in aqueous saline solutionCoautor: Juárez-Islas J.A., Rodríguez-Diaz R.A., Uruchurtu-chavarín J., Cotero-Villegas A.M., et al.2015INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCEWoS-id: 000348365800060
Scopus-id: 2-s2.0-84921632744
2022
26Development of Al-killed/Ti stabilized steels authorA L Ramirez-LedesmaCoautor: Juarez-Islas J.A., Ramirez-Ledesma A.L., Aguilar-Mendez M.A., Rodriguez-Diaz R.A., et al.20154TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEWoS-id: 000352366400009
Scopus-id: 2-s2.0-84921033817
00
27Effect of rapid solidification and heat treatment on Co-20 wt. %Cr alloy for biomedical applicationsCoautor: Juarez-Islas J.A., Ramirez-Ledesma A.L., Aguilar-Mendez M.A., Rodriguez-Diaz R.A.20154TH EUROPEAN SYMPOSIUM ON FIRE SAFETY SCIENCEWoS-id: 000352366400010
Scopus-id: 2-s2.0-84921047791
23
28Effect of growth rate on microstructure and solute distribution of Al-Zn-Mg alloyCoautor: Juarez-Islas J.A., Ramirez-Ledesma A.L., Rodríguez-Díaz R.A., Chavez-Carvayar J., et al.2015TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINAWoS-id: 000356221500005
Scopus-id: 2-s2.0-84930999577
68
29FABRICATION OF A DISORDERED AND NANO-GRAIN SIZED FeAl INTERMETALLIC ALLOY BY TWO BALL MILLING CONDITIONS: MICROSTRUCTURAL CHARACTERIZATION AND CRYSTALLITE MODELING PERSPECTIVECoautor: Juarez-Islas J., Rodríguez-Díaz R.A., Frausto-Solis J., Sedano A., et al.2015DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURESWoS-id: 000357261800004
Scopus-id: 2-s2.0-84935923714
12
30SYNTHESIS OF A NANOSTRUCTURED Al ALLOY MODIFIED WITH Fe BY HIGH ENERGY BALL MILLINGCoautor: Juarez-Islas J., Rodríguez-Díaz R.A., Molina-Ocampo A., Porcayo-Calderón J.2015DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURESWoS-id: 000357261800018
Scopus-id: 2-s2.0-84937037053
12
31Electrochemical corrosion behavior of a Co20Cr alloy in artificial salivaCoautor: Juarez-Islas J.A., Rodríguez-Díaz R.A., Ramirez-Ledesma A.L., Aguilar-Mendez M.A., et al.2015INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCEWoS-id: 000365101700029
Scopus-id: 2-s2.0-84945961611
912
32Corrosion, microstructure and mechanical performance of ultra low C/Cr stabilized steelCoautor: Juarez-Islas J.A., Torres-Islas A., Molina-Ocampo A., Reyes-Hernandez R., et al.2015INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCEScopus-id: 2-s2.0-84953263170
01
33Biocompatibility Evaluation of Co-Ribbons Prepared by Melt-SpinningCoautor: Juárez-Islas J.A., Álvarez-Pérez M.A., García-Hipólito M., Álvarez-Fregoso O.2014Advanced Materials ResearchScopus-id: 2-s2.0-84904195535
00
34Effects of surface morphology of ZnAl2O4 ceramic materials on osteoblastic cells responsesCoautor: Juarez-Islas, JA, "Suarez-Franco, JL, Garcia-Hipolito, M, Surarez-Rosales, MA, et al.2013JOURNAL OF NANOMATERIALSWoS-id: 000315880000001
Scopus-id: 2-s2.0-84875679820
1111
35Corrosion Behavior of Fe-Al Alloy Modified with Cr and Ti in Simulated Physiological Human Media.Coautor: Juárez-Islas J.A., Rodríguez-Díaz R.A., Uruchurtu-Chavarín J., Molina-Ocampo A., et al.2013INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCEWoS-id: 000316562800074
Scopus-id: 2-s2.0-84873274551
810
36Hot Corrosion Behavior of FeAl Intermetallic Compound Modified with Silver in Molten Salt MixtureCoautor: Juárez-Islas J., Rodríguez-Diaz R.A., Uruchurtu-chavarín J., Molina-Ocampo A., et al.2013INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCEWoS-id: 000326501800019
Scopus-id: 2-s2.0-84886539020
77
37Microhardness, Microstructure and Electrochemical Efficiency of an Al (Zn/xMg) Alloy after Thermal TreatmentCoautor: Juarez-Islas, JA, Valdez, S, Suarez, M, Fregoso, OA2012JOURNAL OF MATERIALS SCIENCE & TECHNOLOGYWoS-id: 000303268800010
Scopus-id: 2-s2.0-84859507764
79
38The effect of grain refinement on the mechanical properties of a micro alloyed steelCoautor: Júarez-Islas J.A., Suarez M.A., Alvarez O., Alvarez-Pérez M.A., et al.2012REVISTA MEXICANA DE FISICAScopus-id: 2-s2.0-84867455266
00
39Effect of nanoprecipitates and grain size on the mechanical properties of advanced structural steelsCoautor: Juarez-Islas, JA, Suarez, MA, Alvarez-Perez, MA, Alvarez-Fregoso, O2011MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000291125900007
Scopus-id: 2-s2.0-79955067033
913
40One-dimensional magnetic nanowires obtained by protein fibril biotemplating1ᵉʳ autor: Juárez J., Cambón A., Topete A., Taboada P., et al.2011CHEMISTRY-A EUROPEAN JOURNALWoS-id: 000292208900031
Scopus-id: 2-s2.0-79958818165
2124
41Micellisation of triblock copolymers of ethylene oxide and 1,2-butylene oxide: Effect of B-block lengthCoautor: Juárez J., Cambón A., Alatorre-Meda M., Topete A., et al.2011JOURNAL OF COLLOID AND INTERFACE SCIENCEWoS-id: 000292628500020
Scopus-id: 2-s2.0-79959784117
1514
42Analysis of tidal forces in asynchronous binary systems: X-ray effects2ᵒ autor: Juarez J.A., Hernandez-Gómez A., Koenigsberger G., Moreno E.2011REVISTA MEXICANA DE ASTRONOMIA Y ASTROFISICA, SERIE DE CONFERENCIASScopus-id: 2-s2.0-84878292366
01
43Effect of Cu additions over the lattice parameter and hardness of the NiAl intermetallic compoundCoautor: Juárez-Islas J., Colín J., Serna S., Campillo B., et al.2010JOURNAL OF ALLOYS AND COMPOUNDSWoS-id: 000273204100009
Scopus-id: 2-s2.0-70849109871
2021
44Modulation of size and shape of au nanoparticles using Amino-X-Shaped poly(ethylene oxide) - Poly(propylene oxide) block copolymersCoautor: Juárez J., Goy-López S., Taboada P., Cambón A., et al.2010JOURNAL OF PHYSICAL CHEMISTRY BWoS-id: 000273404500009
Scopus-id: 2-s2.0-75649139866
2831
45Characterization of microstructures obtained in wedge shaped Al-Zn-Mg ingotsCoautor: Juarez, JA, Suarez, MA, Alvarez, O, Alvarez, MA, et al.2010JOURNAL OF ALLOYS AND COMPOUNDSWoS-id: 000276018900088
Scopus-id: 2-s2.0-76749117582
1112
46Block copolymer-regulated synthesis of gold nanocrystals with sharp tips and edges2ᵒ autor: Juárez J., Goy-López S., Cambón A., Botana J., et al.2010J MATER CHEMWoS-id: 000280656200029
Scopus-id: 2-s2.0-77955405817
2121
47Surface Properties of Monolayers of Amphiphilic Poly(ethylene oxide)-Poly(styrene oxide) Block Copolymers1ᵉʳ autor: Juárez J., Goy-López S., Cambón A., Valdez M.A., et al.2010JOURNAL OF PHYSICAL CHEMISTRY CWoS-id: 000281754000022
Scopus-id: 2-s2.0-77956860579
1919
48Obtention of metallic nanowires by protein biotemplating and their catalytic application1ᵉʳ autor: Juárez J., Cambón A., Goy-López S., Topete A., et al.2010JOURNAL OF PHYSICAL CHEMISTRY LETTERSWoS-id: 000282017400013
Scopus-id: 2-s2.0-77956854308
2535
49The effect of strain rate during hot rolling on the mechanical properties of a microalloyed steel2ᵒ autor: Juarez-Islas J.A., Fernandez-Nava E., Campillo B., Aramburu G., et al.2010Materials Science And Technology Conference And Exhibition 2010, Ms And T'10Scopus-id: 2-s2.0-79952692466
00
50Human serum albumin unfolding pathway upon drug binding: A thermodynamic and spectroscopic descriptionCoautor: Juárez J., Cheema M.A., Taboada P., Barbosa S., et al.2009JOURNAL OF CHEMICAL THERMODYNAMICSWoS-id: 000264761400002
Scopus-id: 2-s2.0-59349119859
4546
51Prediction and characterization of growth temperatures in Al-Zn-Mg alloysCoautor: Juarez-Islas, JA, Suarez, MA, Lara, AG, Sanchez-Arevalo, FM, et al.2009MATERIALS CHARACTERIZATIONWoS-id: 000265153800010
Scopus-id: 2-s2.0-61449261793
44
52Existence of different structural intermediates on the fibrillation pathway of human serum albumin1ᵉʳ autor: Juárez J., Taboada P., Mosquera V.2009BIOPHYSICAL JOURNALWoS-id: 000266376700031
Scopus-id: 2-s2.0-66149115219
189203
53Influence of electrostatic interactions on the fibrillation process of human serum albumin1ᵉʳ autor: Juárez J., López S.G., Cambón A., Taboada P., et al.2009JOURNAL OF PHYSICAL CHEMISTRY BWoS-id: 000268231000063
Scopus-id: 2-s2.0-67651236481
94100
54Additional supra-self-assembly of human serum albumin under amyloid-like-forming solution conditions1ᵉʳ autor: Juárez J., Taboada P., Goy-López S., Cambón A., et al.2009JOURNAL OF PHYSICAL CHEMISTRY BWoS-id: 000269655300030
Scopus-id: 2-s2.0-69949117254
3336
55Microstructure and mechanical properties of rapidly solidified FeAlCr intermetallic compoundCoautor: Juárez-Islas J., Rodríguez-Díaz R.A., Suárez M., Garnica-Romo M.G., et al.2009Journal Of Applied Research And TechnologyWoS-id: 000269720500010
Scopus-id: 2-s2.0-77956458340
22
56Biocompatibility of Zinc Aluminate Nanostructured MaterialCoautor: Juarez-Islas, JA, Alvarez-Perez, MA, Garcia-Hipolito, M, Hernandez, JD, et al.2009JOURNAL OF NANO RESEARCHWoS-id: 000271238900020
Scopus-id: 2-s2.0-65649131599
55
57Processing and characterization of microalloyed steel to aluminumCoautor: Juarez-Islas, JA, Suarez, MA, Herrera-Becerra, R, Valdez, S, et al.2009REVISTA MEXICANA DE FISICAWoS-id: 000273064000011
00
58In Vitro Studies of Osteoblasts Response Onto Zinc Aluminate Ceramic FilmsCoautor: Islas, JAJ, Alvarez-Péreza M.A., Bello J.S., Hipolito M.G., et al.2009MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALSWoS-id: 000273976800021
Scopus-id: 2-s2.0-76649135797
88
59MICROSTRUCTURAL CHARACTERIZATION OF Fe40Al5Cr (% at.) INTERMETALLIC ALLOY PRODUCED BY RAPID SOLIDIFICATIONCoautor: Juarez-Islas, JA, Rodriguez-Diaz, RA, Banos, L, Novelo, O, et al.2009ACTA MICROSCOPICAWoS-id: 000276809800017
70
60Effect of Mg addition on the t phase distribution of an AlMn alloys modified with zincCoautor: Juarez-Islas, JA, Valdez, S, Genesca, J, Campillo, B, et al.2008MATERIALS LETTERSWoS-id: 000253106100093
Scopus-id: 2-s2.0-37449012154
22
61Influence of external factors on the micellization process and aggregate structure of poly(oxy)styrene-poly(oxy)ethylene block copolymersCoautor: Juárez J., Castro E., Barbosa S., Taboada P., et al.2008JOURNAL OF PHYSICAL CHEMISTRY BWoS-id: 000255292300007
Scopus-id: 2-s2.0-47149115286
1720
62Self-assembly process of different poly(oxystyrene)-poly(oxyethylene) block copolymers: Spontaneous formation of vesicular structures and elongated micelles1ᵉʳ autor: Juárez J., Taboada P., Valdez M.A., Mosquera V.2008LangmuirWoS-id: 000257468300014
Scopus-id: 2-s2.0-47949089582
1616
63Microstructural and lattice parameter study of as-cast and rapidly solidified NiAl intermetallic alloys with Cu additionsCoautor: Juárez-Islas J., Colín J., Serna S., Carnpillo, B, et al.2008IntermetallicsWoS-id: 000257613600001
Scopus-id: 2-s2.0-45049087992
1818
64Development of microalloyed steel for pipeline applicationsCoautor: Juarez-Islas, JA, Olivares, I, Alanis, M, Mendoza, R, et al.2008IRONMAKING & STEELMAKINGWoS-id: 000260208800007
Scopus-id: 2-s2.0-52649156075
1113
65Effect of microstructure on the sulphide stress cracking susceptibility of a high strength pipeline steelCoautor: Juárez-Islas J.A., Ramírez E., González-Rodriguez J.G., Torres-Islas A., et al.2008CORROSION SCIENCEWoS-id: 000262064200034
Scopus-id: 2-s2.0-56649089679
5874
66Hydrogen permeability behaviour of a high strength microalloyed steel developed for sour serviceCoautor: Juárez-Islas J., Serna S., Morales E.R., González-Rodríguez J.G., et al.2008NACE - International Corrosion Conference SeriesScopus-id: 2-s2.0-69249106926
00
67Hydrogen permeability behaviour of a high strength microalloyed steel developed for sour serviceCoautor: Juárez-Islas J., Serna S., Morales E.R., González-Rodríguez J.G., et al.2008NACE - International Corrosion Conference SeriesScopus-id: 2-s2.0-69349088234
02
68Behavior of inhibitor protective film in a X-80 steel in NACE solutionCoautor: Juarez-Islas J.J., Torres-Islas A., Uruchurtu J., Serna S., et al.2008Eurocorr 2008 - European Corrosion Congress: Managing Corrosion For Sustainability, Book Of AbstractsScopus-id: 2-s2.0-78049342623
00
69Interfacial behavior of N-nitrosodiethylamine/bovine serum albumin complexes at the air-water and the chloroform-water interfaces by axisymmetric drop tensiometry1ᵉʳ autor: Juárez J., Galaz J.G., Machi L., Burboa M., et al.2007JOURNAL OF PHYSICAL CHEMISTRY BWoS-id: 000244735300041
Scopus-id: 2-s2.0-34047253721
1615
70Effect of Mg content on the performance of Al-Zn-Mg sacrificial anodesCoautor y autor de correspondencia: Juarez-Islas J., Orozco R., Genesca J.2007JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: 000246320800016
Scopus-id: 2-s2.0-34247562850
2633
71Prediction of microstructure and distribution of solute in Al-Zn-Mg non-dilute alloysCoautor y autor de correspondencia: Juarez-Islas J.A., Soto J.L., Campillo B.2007Materials Science ForumScopus-id: 2-s2.0-38349119176
00
72Effect of microestructure on the CO2 corrosion inhibition by carboxyamidoimidazolines on a pipeline steelCoautor: Juárez-Islas J.A., Gonzalez-Rodriguez J.G., Zeferino-Rodriguez T., Ortega D.M., et al.2007INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCEScopus-id: 2-s2.0-84860895441
022
73Pulsed electrode deposition of superhard coatings on steel substrates: Microstructural and chemical studyCoautor: Juárez-Islas J., Constantino M.E., Campillo B., Staia M.H., et al.2006SURFACE ENGINEERINGWoS-id: 000240142600010
Scopus-id: 2-s2.0-33747077192
44
74The effect of hot rolling on room temperature ductility of a NiAl intermetallic compoundCoautor: Juarez-Islas J.A., Garcia-Galan S., Aramburo-Perez G., Gonzalez-Rivera C., et al.2006Materials Science ForumScopus-id: 2-s2.0-35748955538
00
75Mechanical properties of ultra clean low C/Cr stabilized annealed sheetsCoautor: Juárez-Islas J., Molina A., Campillo B., Mendoza R., et al.2006Materials Science ForumScopus-id: 2-s2.0-35748974235
00
76Failure analysis of a gas turbine blade made of Inconel 738LC alloyCoautor: Juárez-Islas J.A., Mazur Z., Luna-Ramírez A., Campos-Amezcua A.2005ENGINEERING FAILURE ANALYSISWoS-id: 000227423000014
Scopus-id: 2-s2.0-13844298928
188217
77Characterization and prediction of microstructure in Al-Zn-Mg alloysCoautor: Juarez-Islas J.A., Alvarez O., Gonzalez C., Aramburo G., et al.2005MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000231552800040
Scopus-id: 2-s2.0-23044511597
1420
78Chitosan-cholesterol and chitosan-stearic acid interactions at the air-water interfaceCoautor: Juárez J., Parra-Barraza H., Burboa M.G., Sánchez-Vázquez M., et al.2005BiomacromoleculesWoS-id: 000231899200007
Scopus-id: 2-s2.0-25844469531
6062
79Distribution and prediction of solute in Al-Zn-Mg alloysCoautor: Juarez-Islas J.A., Soto J., Aramburo G., Gonzalez C., et al.2005MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000233524700043
Scopus-id: 2-s2.0-27944480063
1016
80Electrochemical characteristics of Al-Zn-Mg alloys as sacrificial anodes in sea waterCoautor: Juarez-Islas J.A., Orozco R., Canto C.M., Genesca J.2005NACE - International Corrosion Conference SeriesScopus-id: 2-s2.0-85046884684
00
81Evaluation of low carbon Al-killed/Cr-stabilized steel to be used in the automobile industryCoautor: Juárez-Islas J.A., Mendoza R., Alanis M., Aramburo G., et al.2004MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000220055800030
Scopus-id: 2-s2.0-1542757535
37
82Fourier thermal analysis of the solidification kinetics in A356/SiC p cast compositesCoautor: Juarez J., Baez J.C., Gonzalez C., Chavez M.R., et al.2004JOURNAL OF MATERIALS PROCESSING TECHNOLOGYWoS-id: 000225845500084
Scopus-id: 2-s2.0-9444240332
1519
83Metallurgical assessment of degradation of a gas turbine bucket made of Inconel 738LC alloy after 24000 h in serviceCoautor y autor de correspondencia: Juárez-Islas J.A., Mazur Z., Luna-Ramírez A.2004American Society Of Mechanical Engineers, Power Division (publication) PwrScopus-id: 2-s2.0-2942592211
07
84Prediction of microstructure and distribution of solute in ternary Al-Zn-Mg alloys designed for cathodic protection applicationsCoautor y autor de correspondencia: Juarez-Islas J.A., Gonzalez C., Herrera R.2004Solidification Of Aluminum AlloysScopus-id: 2-s2.0-3042778512
00
85Electrochemical behavior of new ternary aluminum alloys as sacrificial anodesCoautor: Juarez-Islas J.A., Genesca J., Talavera M.A., Orozco R.2004Eurocorr 2004 - European Corrosion Conference: Long Term Prediction And Modelling Of CorrosionScopus-id: 2-s2.0-84867256161
01
86Mechanical properties of a recrystallized low carbon steelCoautor: Juarez-Islas J.A., Mendoza R., Molina A., Serrania F.2003SCRIPTA MATERIALIAWoS-id: 000180904300012
Scopus-id: 2-s2.0-0037292113
55
87Solidification of chill-cast Al-Zn-Mg alloys to be used as sacrificial anodesCoautor: Juarez-Islas J.A., Gonzalez C., Alvarez O., Genesca J.2003METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCEWoS-id: 000187241200028
Scopus-id: 2-s2.0-3142772650
1923
88The effect of Cu-macroalloying on ß-NiAl intermetallic compound obtained by mechanical alloyingCoautor: Juárez-Islas J., García-Galán S., Arámburo-Pérez G., González-Rivera C.2003JOURNAL OF MATERIALS PROCESSING TECHNOLOGYWoS-id: 000187510100104
Scopus-id: 2-s2.0-0242523647
34
89Quantification of the SiCp content in molten Al-Si/SiC p composites by computer aided thermal analysisCoautor: Juarez-Islas J., Gonzalez-Rivera C., Baez J., Chavez R., et al.2003JOURNAL OF MATERIALS PROCESSING TECHNOLOGYWoS-id: 000187510100158
Scopus-id: 2-s2.0-0242439612
67
90Effect of SiCp content on cooling curve characteristics and solidification kinetics of Al-Si/SiCp cast compositesCoautor: Juarez-Islas J., Gonzalez-Rivera C., Baez J., Chavez R., et al.2003INT J CAST METAL RESWoS-id: 000189306200003
Scopus-id: 2-s2.0-1642351676
810
91Analysis of Microstructure and Electrochemical Efficiency of Chill Cast Al-Zn-Mg Alloys Designed for Cathodic Protection ApplicationsCoautor: Juarez-Islas J.A., Genesca J., Herrera R., Gonzalez C., et al.2003Materials Science ForumWoS-id: 000189444600003
Scopus-id: 2-s2.0-0346368601
11
92Microstructural characterization of (Ni, Cu) Al intermetallic compounds rapidly solidifiedCoautor: Juarez-Islas J.A., Garcia-Galan S., Gonzalez-Rivera C., Alvarez-Fregoso O.2002MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000176762600099
Scopus-id: 2-s2.0-0036601864
11
93EIS testing of new aluminium sacrificial anodesCoautor: Juarez-Islas J.A., Talavera M.A., Valdez S., Mena B., et al.2002JOURNAL OF APPLIED ELECTROCHEMISTRYWoS-id: 000178472100010
Scopus-id: 2-s2.0-0036703049
2031
94On the processing of Fe-C-Mn-Nb steels to produce plates for pipelines with sour gas resistanceCoautor: Juarez-Islas J.A., Mendoza R., Alanis M., Perez R., et al.2002MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: 000179005400017
Scopus-id: 2-s2.0-0037176074
2027
95Analysis of chill-cast NiAl intermetallic compound with copper additionsCoautor: Juarez-Islas J.A., Colin J., Gonzalez C., Herrera R.2002JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEScopus-id: 2-s2.0-0036811348
68
96Microstructure and segregation profiles of nitrogen-atomized Al-2.56 wt. % Fe powders1ᵉʳ autor: Juarez-Islas J.A., Mendez M., Zhou Y., Lavernia E.J.2001J MATER SCI LETTWoS-id: 000167219000012
Scopus-id: 2-s2.0-0035862458
00
97Morphological, optical, and photoluminescent characteristics of GaAs1-xNx nanowhiskered thin filmsCoautor: Juárez-Islas J.A., Canales-Pozos S.A., Ríos-Jara D., Alvarez-Fregoso O., et al.2001APPLIED PHYSICS LETTERSWoS-id: 000171466200018
Scopus-id: 2-s2.0-0035886078
44
98Blue photoluminescence in GaAs(N) nanowhiskersCoautor: Juarez-Islas J.A., Canales Pozos S.A., Rios Jara D., Alvarez-Fregoso O., et al.2001MODERN PHYSICS LETTERS BWoS-id: 000171910900048
Scopus-id: 2-s2.0-0035921477
00
99Evaluation of an Al-Zn-Mg-Li alloy/potential candidate as Al-sacrificial anodeCoautor: Juarez-Islas J.A., Valdez S., Genesca J., Mena B.2001JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEScopus-id: 2-s2.0-0035441432
811
100Activation of an Al-Zn-Mg-Li alloy by the presence of precipitates to be used as sacrificial anodeCoautor: Juarez-Islas J.A., Valdez S., Talavera M.A., Genesca J.2001Materials Research Society Symposium ProceedingsScopus-id: 2-s2.0-0035557889
02
101The effect of Cu-macroalloying additions to rapidly solidified NiAl intermetallic compoundCoautor: Juarez-Islas J.A., Colin J., Campillo B., Gonzalez C., et al.2001Materials Research Society Symposium ProceedingsScopus-id: 2-s2.0-0035559394
01
102On the formation of the spinel MgAl2O4 during steel deoxidation and its effectCoautor: Juarez-Islas J.A., Mendoza R., Alanis M., Gonzalez C.2001HIGH TEMPERATURE MATERIALS AND PROCESSESScopus-id: 2-s2.0-0035720363
00
103Development and testing of aluminum sacrificial anodes In/Hg freeCoautor: Juarez-Islas J., Talavera M.A., Valdez S., Genescá J.2001NACE - International Corrosion Conference SeriesScopus-id: 2-s2.0-80053057621
02
104Evaluation of the mechanical properties and corrosion behaviour of ultra-clean steelsCoautor: Juarez-Islas J.A., Mendoza R., Alanis M., Huante J., et al.2000JOURNAL OF MATERIALS PROCESSING TECHNOLOGYWoS-id: 000086418100033
Scopus-id: 2-s2.0-0033878519
87
105High-temperature corrosion observed in austenitic coils and tubes in a direct reduction processCoautor: Juarez-Islas J.A., Campillo B., Gonzalez C., Hernandez-Duque G.2000JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEScopus-id: 2-s2.0-0033882807
05
106Processing of ultra low carbon steels with mechanical properties adequate for automotive applications in the as-annealed conditionCoautor: Juarez-Islas J.A., Mendoza R., Huante J., Alanis M., et al.2000MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGScopus-id: 2-s2.0-0033906544
037
107On the local microstructural characteristics observed in sand cast Al-Si alloysCoautor: Juárez-Islas J., González-Rivera C., Campillo B., Castro M., et al.2000MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGScopus-id: 2-s2.0-0034140598
017
108Processing conditions of an ultra low carbon/Ti stabilized steel developed for automotive applicationsCoautor: Juarez-Islas J.A., Mendoza R., Alanis M., Alvarez-Fregoso O.2000SCRIPTA MATERIALIAScopus-id: 2-s2.0-0034273776
59
109Nanostructured GaAs(N) thin films prepared by RF sputtering2ᵒ autor: Juárez-Islas J.A., Alvarez-Fregoso O., Zelaya-Angel O., Mendoza-Alvarez J.G.2000PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICSScopus-id: 2-s2.0-0034341692
06
110Cu/Mo nanostructured alloy thin filmsCoautor: Juárez-Islas J.A., Alvarez-Fregoso O., López S., García M., et al.2000PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICSScopus-id: 2-s2.0-0034341907
07
111Effect of heat transfer on local solidification kinetics of eutectic Al-Si cast alloyCoautor: Juarez-Islas J.A., González-Rivera C., Cruz M. H., García H. A.1999JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: 000079227100013
Scopus-id: 2-s2.0-0039385497
910
112Spray atomization of two Al-Fe binary alloys: solidification and microstructure characterization1ᵉʳ autor: Juarez-Islas J., Zhou Y., Lavernia E.J.1999JOURNAL OF MATERIALS SCIENCEWoS-id: 000079759900008
Scopus-id: 2-s2.0-0033100983
1318
113Microwave plasma nitriding of pure ironCoautor: Juarez-Islas J.A., Camps E., Muni S., Alvarez-Fregoso O., et al.1999JOURNAL OF VACUUM SCIENCE & TECHNOLOGY AWoS-id: 000081485800043
Scopus-id: 2-s2.0-0012224799
77
114Slab cracking after continuous casting of API 5L X-70 grade steel for pipeline sour gas applicationCoautor: Juarez-Islas J.A., Mendoza R., Huante J., Alanis M., et al.1999IRONMAKING & STEELMAKINGScopus-id: 2-s2.0-0032684169
013
115Microstructural characterization and solidification behavior of atomized Al-Fe powders2ᵒ autor: Juarez-Islas J.A., Zhou Y., Alvarez-Fregoso O., Yoon W.Y., et al.1999JOURNAL OF MATERIALS RESEARCHScopus-id: 2-s2.0-0033099477
03
116Development of an API 5L X-70 grade steel for sour gas resistance pipeline applicationCoautor: Juarez-Islas J.A., Mendoza R., Huante J., Camacho V., et al.1999JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEScopus-id: 2-s2.0-0033343522
016
117Characterization of a solid solution of Cu in Al-Cu-SiCp metal matrix composites processed by spray atomization and co-deposition1ᵉʳ autor: Juarez-Islas J.A., Campillo B., Perez R., Su S., et al.1998JOURNAL OF MATERIALS SCIENCEWoS-id: 000071065300038
Scopus-id: 2-s2.0-0031695732
87
118Synthesis and characterization of bulk nanocrystalline M50 steel by cryomillingCoautor: Juarez-Islas J., Lau M.L., Jiang H.G., Perez R.J., et al.1997NANOSTRUCT MATERScopus-id: 2-s2.0-0000873717
014
119Tensile stress induced phase transformations in Zn-Al alloy2ᵒ autor y autor de correspondencia: Islas J.J., Zhu Y.H.1997JOURNAL OF MATERIALS SCIENCE & TECHNOLOGYScopus-id: 2-s2.0-0030677183
06
120Microstructures and dimensional stability of extruded eutectoid Zn-Al alloy2ᵒ autor y autor de correspondencia: Islas J.J., Zhu Y.H.1997JOURNAL OF MATERIALS PROCESSING TECHNOLOGYWoS-id: A1997XH57800034
Scopus-id: 2-s2.0-0031120186
1414
121Effect of heat treatment on the efficiency of Mg anodesCoautor: Juarez-Islas J., Campillo B., Rodriguez C., Genesca J., et al.1997JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: A1997XN37100009
Scopus-id: 2-s2.0-0031208017
46
122FeN and FeN-H thin films prepared by ECR microwave plasma nitridingCoautor: Juárez-Islas J.A., Alvarez-Fregoso O., Chávez-Carvayar J.A., Camps E., et al.1997SURFACE & COATINGS TECHNOLOGYScopus-id: 2-s2.0-0031248421
010
123Rapid solidification of copper alloys with high strength and high conductivityCoautor: Juarez-Islas J.A., Lopez F., Reyes J., Campillo B., et al.1997JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEWoS-id: A1997XY94800009
Scopus-id: 2-s2.0-0031257898
1520
124Synthesis of nanocrystalline M50 steel powders by cryomillingCoautor: Juarez-Islas J., Lau M.L., Jiang H.G., Perez R.J., et al.1996NANOSTRUCT MATERScopus-id: 2-s2.0-0030285234
2124
125An improvement of the anodic efficiency of commercial Mg anodesCoautor: Juarez-Lslas J., Campillo B., Rodriguez C., Genesca J., et al.1996NACE - International Corrosion Conference SeriesScopus-id: 2-s2.0-85046757686
02
126Microstructure and mechanical behavior of spray deposited Zn modified 7XXX series Al alloys2ᵒ autor: Juarez-Islas J.A., Lengsfeld P., Cassada W.A., Lavernia E.J.1995INT J RAPID SOLIDIFScopus-id: 2-s2.0-0029427397
035
127Quasicrystalline phases in alloys of AlCuCoFe obtained with a gravity chill-casting technique2ᵒ autor: Juarez-Islas J.A., Perez R., Martinez L.1994MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: A1994NR22900029
Scopus-id: 2-s2.0-0000961037
35
128Microstructural and mechanical evaluations of spray-deposited 7XXX Al-alloys after conventional consolidation1ᵉʳ autor: Juárez-Islas J.A., Perez R., Lengsfeld P., Lavernia E.J.1994MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: A1994NN06000127
Scopus-id: 2-s2.0-0013438239
1321
129Solid solution of Cu in (AlCu)SiCp metal matrix composites processed by spray atomization and codeposition1ᵉʳ autor: Juárez-Islas J.A., Su S., Perez R., Campillo B., et al.1994MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: A1994NN06000126
Scopus-id: 2-s2.0-0028083739
12
130Biocorrosion and Microstructure of 316 L Stainless Steel Modified by Poison Alloying Elements in Sea Water2ᵒ autor: Juarez-Islas J.A., Duque G.H., Lemaitre C., Beranger G., et al.1994CORROS REVScopus-id: 2-s2.0-0028152210
02
131Structure transformations of quasicrystalline phases in quaternary alloys2ᵒ autor: Juarez-Islas J.A., Perez R., Martinez L.1994MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGWoS-id: A1994NR22900026
Scopus-id: 2-s2.0-0028430668
00
132SEM and HREM characterization of precipitation in a boron microalloyed steel1ᵉʳ autor: Juarez-Islas J.A., Perez R., Albarran J.L., Flores O., et al.1994MATERIALS LETTERSWoS-id: A1994PR89500014
Scopus-id: 2-s2.0-0028524347
22
133Formation of quasicrystalline phases in an Al?Cu?Co?Fe alloy obtained by using a gravity chill-casting techniqueCoautor: Juarez-Islas J.A., Perez R., Arizmendi A., Martinez L.1993JOURNAL OF MATERIALS RESEARCHWoS-id: A1993KZ50200009
Scopus-id: 2-s2.0-0027594812
55
134Improving the efficiency of magnesium sacrificial anodes1ᵉʳ autor: Juárez-Islas J.A., Genesca J., Pérez R.1993JOMWoS-id: A1993LW18500009
Scopus-id: 2-s2.0-0027659381
48
135Microstructural characteristics of quasicrystalline phases in alloys of AlCuFeCo2ᵒ autor: Juarez-Islas J.A., Perez R., Albarran J.L.1992Acta Metallurgica Et MaterialiaWoS-id: A1992JH16700037
Scopus-id: 2-s2.0-0009905651
44
136Nitride width and microhardness in H-12 ion nitrided steel2ᵒ autor: Juárez-Islas J.A., Albarran J.L., Martinez L.1992MATERIALS LETTERSWoS-id: A1992JT71900013
Scopus-id: 2-s2.0-0026938204
810
137On the phase transformation between the quasicrystalline to crystalline phases in alloys of Al-Cu-Fe-Co2ᵒ autor: Juarez-Islas J.A., Perez R., Martinez L., Campillo B., et al.1992Metallurgical Transactions AWoS-id: A1992JW15100023
Scopus-id: 2-s2.0-0026953497
11
138Dissolution and coarsening of large niobium carbonitrides in a microalloyed steelCoautor: Juarez-Islas J., Campillo B., Flores O., Albarran J.L., et al.1992JOURNAL OF MATERIALS SCIENCEScopus-id: 2-s2.0-0343525454
57
139Development of high-strength, high-conductivity copper alloys by rapid solidification1ᵉʳ autor: Juarez-Islas J.A., Perez R., Albarran L.A., Rivera V., et al.1992J MATER SCI LETTWoS-id: A1992JJ21100008
Scopus-id: 2-s2.0-30244533195
911
140HREM studies of rapidly solidified NiFeAlB shape memory alloys1ᵉʳ autor: Juárez-Islas J.A., Pérez R., Savage S.J.1992MATERIALS LETTERSWoS-id: A1992JC20000001
Scopus-id: 2-s2.0-44049118350
00
141Microstructure, excess solid solubility, and elevated-temperature mechanical behavior of spray-atomized and codeposited Al-Ti-SiCP2ᵒ autor: Juarez-Islas J., Gupta M., Frazier W.E., Mohamed F.A., et al.1992Metallurgical Transactions B (Process Metallurgy)WoS-id: A1992KH94800005
Scopus-id: 2-s2.0-51249164093
3641
142Rapidly solidified Al-Cr-Hf alloys. Structure and mechanical properties1ᵉʳ autor y autor de correspondencia: Juarez-Islas J.A.1991Light-Weight Alloys For Aerospace Applications IiScopus-id: 2-s2.0-0025843284
00
143Rapid solidification of MgAlZnSi alloys1ᵉʳ autor y autor de correspondencia: Juarez-Islas J.A.1991MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGScopus-id: 2-s2.0-0026122451
46
144Some preliminary results on the microstructure and mechanical properties of rapidly solidified nickel-based superalloysCoautor: Juárez-Islas J.A., Albarrán J.L., Campillo B., Pérez R., et al.1991Scripta Metallurgica Et MaterialaWoS-id: A1991FU81400023
Scopus-id: 2-s2.0-0026191218
00
145Analysis of the microstructure obtained by using unidirectional solidification, tungsten inert gas weld and laser surface melt traversing techniques in Al-Mn alloys1ᵉʳ autor y autor de correspondencia: Juarez-Islas J.A.1991JOURNAL OF MATERIALS SCIENCEWoS-id: A1991GF93300028
Scopus-id: 2-s2.0-34249929058
68
146Quasicrystals in Al-Mn and Al-Mn-Si alloys1ᵉʳ autor: Juarez-Islas J.A., Albarran J.L., Campillo B., Martinez L.1991J MATER SCI LETTWoS-id: A1991EV57900020
Scopus-id: 2-s2.0-51649153331
00
147Response of Al-Cr-Hf alloys to extended soaking treatment at 0.7 Tm1ᵉʳ autor: Juarez-Islas J.A., Tsakiropoulos P., Jones H.1990INT J RAPID SOLIDIFScopus-id: 2-s2.0-0025685899
02
148The dependence of cell spacing on growth velocity and alloy concentration at high solidification front velocities1ᵉʳ autor: Juarez-Islas J.A., Jones H.1989MATERIALS LETTERSWoS-id: A1989T152200004
Scopus-id: 2-s2.0-0024303086
33
149Formation of stable and metastable phases in Al-Mn alloys by the use of a gravity chill casting technique1ᵉʳ autor: Juarez-Islas J.A., Warrington D.H., Jones H.1989JOURNAL OF MATERIALS SCIENCEWoS-id: A1989U938200030
Scopus-id: 2-s2.0-0024682789
1722
150Effect of solidification front velocity on the characteristics of aluminium-rich AlMn alloy solutions extended by rapid solidification1ᵉʳ autor: Juarez Islas J.A., Jones H., Kurz W.1988Materials Science And EngineeringScopus-id: 2-s2.0-0023952896
038
151Conditions for growth of extended Al-rich Al-Mn alloy solid solutions and Al-Al6Mn eutectic during rapid solidification1ᵉʳ autor: Juarez-Islas J.A., Jones H.1987ACTA METALL MATERWoS-id: A1987F961200021
Scopus-id: 2-s2.0-0023288051
3640
Descargar PDF

Documentos no indexados (Humanindex)

# Título del documento ISSN Revista Año Fuente
Descargar PDF

Capítulos de libros (WoS y Scopus)

# Título del capítulo Título del libro Autores Alcance Año ISBN Fuente
1GRAIN BOUNDARIES IN AN Fe-Al ALLOY: CHARACTERIZATION OF GRAIN BOUNDARY ENSEMBLES AND CRACK PROPAGATION IN AN Fe-AI ALLOYAdvances In Physical MetallurgyJuarez I.J., Perez C.R., Flores C.O., et al.Capítulo de un Libro20239781000944044Scopus-id: 2-s2.0-85169387886
2Microstructural evaluation of salt nitrocarburizing as a function of timeAsm International - 28th Heat Treating Society Conference, Heat Treating 2015Juarez-lslas J.A., Mendez M.F., Conference Paper20159781510815100Scopus-id: 2-s2.0-84965161943
3Corrosion, microstructure and mechanical performance of interstitial free steelEstimating Internal Corrosion Evolution Of Oil Pipelines By Deterministic & Reliability AnalysisJuarez-Lslas J.A., Torres-Lslas A., Molina A., et al.Conference Paper20159781510837379Scopus-id: 2-s2.0-85026231528
4Electrochemical behavior of new ternary aluminum alloys as sacrificial anodesCorrosion Behaviour And Protection Of Copper And Aluminium Alloys In SeawaterJuarez-Islas J.A., Orozco-Cruz R., Genesca J., Capítulo de un Libro20079781845692414Scopus-id: 2-s2.0-84904085242
Descargar PDF

No se encuentran registros en la base de datos de obras con ISBN (Indautor).

Descargar PDF

Proyectos

# Nombre Participantes Convocatoria Fecha Inicio Fecha Fin
1Solidificación de materiales compuestos y recubrimientos i.JULIO ALBERTO JUAREZ ISLAS,
Presupuesto de la UNAM asignado a la Dependencia01-01-201831-12-2021
2Fabricación, procesamiento termomecánico/térmico y caracterización microestructural y mecánica de aceros duales automotrices.JULIO ALBERTO JUAREZ ISLAS,
Recursos PAPIIT01-01-201931-12-2020
3Desarrollo de superaleaciones base cobalto para aplicaciones aeroespacialesJULIO ALBERTO JUAREZ ISLAS,
Recursos PAPIIT01-01-202231-12-2023
4recubrimientos i.JULIO ALBERTO JUAREZ ISLAS,
Presupuesto de la UNAM asignado a la Dependencia01-01-202231-12-2025
Descargar PDF

Participación en Comités de Tesis

# Título del documento Tipo de Tesis Sinodales Autores Año Entidad Url
1"Efecto del procesamiento termomecánico y tratamiento de recocido en un acero IF estabilizado con titanio"Tesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Aburto Perdomo, Esteban; 2023Instituto de Investigaciones en Materiales,
2Evaluación microestructural y mecánica de un acero desarrollado para su aplicación automotriz, después de su fusión, laminación en caliente y tratamiento térmicoTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Durán Núñez, Alberto; 2022Instituto de Investigaciones en Materiales,
3Evaluación del uso de la ecuación de vida útil remanente, para la decisión de extensión de vida de componentes en plataformas petroleras costa afueraTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Hernández García, Pedro Brayan; 2022Instituto de Investigaciones en Materiales,
4Efecto de los tratamientos isotérmicos sobre la microestructura y propiedades mecánicas de una aleación Co-Cr solidificada rápidamente para aplicaciones biomédicasTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; ANA LAURA RAMIREZ LEDESMA; Lagar Quinto, Sebastián; 2022Facultad de Química, Instituto de Investigaciones en Materiales,
5Estudio del crecimiento acoplado en la solidificación de aleaciones ternarias base Zn coladas en moldes metálicos con forma de cuñaTesis de MaestríaMARCO ANTONIO ALVAREZ PEREZ; JULIO ALBERTO JUAREZ ISLAS; ANA LAURA RAMIREZ LEDESMA; Domínguez Contreras, Luis Ángel; 2022Facultad de Odontología, Facultad de Química, Instituto de Investigaciones en Materiales,
6Efecto de la laminación en caliente y recocido de una aleación Co-20% Cr solidificada rápidamente para aplicaciones biomédicasTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; ANA LAURA RAMIREZ LEDESMA; Luna Manuel, Juan Carlos; 2020Dirección General de Asuntos del Personal Académico, Instituto de Investigaciones en Materiales,
7Evaluación del proceso de nitrocarburizado líquido en función del tiempo y la temperatura de un acero H13Tesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Vázquez Ramírez, Alberto; 2017Instituto de Investigaciones en Materiales,
8Efecto de la solidificación rápida en aleaciones base cobalto como aleación biocompatibleTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Ramírez Ledesma, Ana Laura; 2016Instituto de Investigaciones en Materiales,
9Efecto del tratamiento térmico en las propiedades mecánicas de la aleación cobalto-cromoTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Aguilar Méndez, Marco Antonio; 2015Instituto de Investigaciones en Materiales,
10Análisis microestructural y de propiedades de un cordón de soldadura de acero inoxidable 347Tesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Flores Franco, Cinthia Karen; 2015Instituto de Investigaciones en Materiales,
11Estudio microestructural de un sistema al-al3 ti sometido a un proceso de extrusión angular a sección constanteTesis de MaestríaJOSE BERNARDO HERNANDEZ MORALES; JULIO ALBERTO JUAREZ ISLAS; Camacho Hernández, Francisco Maximino; 2015Facultad de Química, Instituto de Investigaciones en Materiales,
12Efecto termomecánico, mecánico y de recocido en aceros libres de elementos intersticiales (IF) estabilizados con titanioTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Arámburo Pérez, G.; 2013Instituto de Investigaciones en Materiales,
13Estudio para evaluar y calificar el procedimiento de soldadura del acero SA-312 TP 347Tesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; León Castro, Iván; 2013Instituto de Investigaciones en Materiales,
14Efecto de la rapidez de deformación de un acero grado API X70 sobre la microestructura y propiedades mecánicas de tensión e impactoTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Hernández Nava, Everth; 2010Instituto de Investigaciones en Materiales,
15Predicción de las microestructuras de solidificación y distribución de soluto en aleaciones ternarias : teoría contra experimentoTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Suárez Rosales, Miguel Ángel; 2009Instituto de Investigaciones en Materiales,
16Caracterización microestructural de un acero grado API-X80Tesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Castro Robles, Juan de Dios; 2009Instituto de Investigaciones en Materiales,
17Procesamiento de compuestos intermetálicos FeAl por solidificación rápida - microestructura y propiedades mecánicasTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Rodríguez Díaz, Roberto Ademar; 2008Instituto de Investigaciones en Materiales,
18Efecto de la macroaleacion y del precesamiento sobre las propiedades mecanicas del compuesto intermetalico NiAlTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Colin de la Cruz, Jesus Mario; 2004
19Evaluacion microestructural y de propiedades mecanicas de aceros de ultra bajo carbono para su aplicacion en la industria automotrizTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Molina Ocampo, Arturo; 2004
20Montaje y caracterizacion del proceso de rociado de flama con deposito de zinc sobre substratos de acero grado APITesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Suarez Rosales, Miguel Angel; 2004
21Desarrollo de una nueva aleación base aluminio para la protección catódica de tubos sumergidos en agua de marTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Valdéz Rodríguez, Socorro del Carmen; 2003
22Optimizacion de aceros ultralimpios para su aplicacion en la industria automotrizTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Guardian Tapia, Rene; 2002
23Desarrollo de aceros libres de elementos intersticiales para su aplicacion en la industria automotrizTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Corona Patiño, José Luis; 2002
24Efecto de la adicion de cobre y procesamiento en el intermetalico NIAITesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Aguilar Mendoza, Daniel; 2001
25Caracterizacion microestructural de polvos atomizados Al-FeTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Rosa Canales, Luis Daniel de la; 2001
26Tratamientos termomecanicos mecanicos y termicos de aceros libres de elementos intersticialesTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Baron de la Rosa, Joel; 2000
27Material monoestructurado Fe - 10% wt.AITesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; López Sanchez, Fernando; 2000
28Caracterizacion microestructural de una aleacion de Fe-10%A1 fabricada por molienda mecanica y consolidadaTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Soto Guerrero, José Luis; 2000
29Identificacion de precipitados en la aleacion Al-Zn-Mg-Li, para su uso como anodos de sacrificioTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Valdéz Rodríguez, Socorro del Carmen; 2000
30Caracterizacion de las aleaciones nanoestructuradas...Fe-10wt%A1Tesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Chávez Rivas, Bernardo; 1999
31Caracterizacion microestructural de placas de acero grado API 5LX-70 para tuberia resistente al gas amargoTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Martin Bueno, Miguel Angel; 1999
32Estudio del proceso de fabricacion de lamina para estampado de acero de bajo carbono y estabilizado con titanioTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Molina Ocampo, Arturo; 1998
33Simulacion de la transferencia de calor y de la cinetica de solidificacion de aleaciones hipoeutecticas y eutectica Al-Si coladas en moldes de arenaTesis de DoctoradoJULIO ALBERTO JUAREZ ISLAS; Gonzalez Rivera, Carlos; 1998
34Caracterizacion microestructural de un acero libre de elementos intersticiales en la condicion de colada, austenitizado y tratado termomecanicamenteTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Herrera Aranda, Luis Ricardo; 1997
35Desarrollo tecnologico en la fabricacion de aceros ultralimpiosTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; López Flores, Cesar; 1996
36Desarrollo de aleaciones extraligeras de Mg-Li con alta resistencia mecanicaTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Ruiz Reyes, Rogelio; 1994
37Crecimiento dendritico en aleaciones Al-Mn: teoria y experimentoTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Vargas Rico, Hugo Heriberto; 1994
38Teoria de crecimiento dendritico : comparacion de teoria con datos experimentalesTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Juarez Hernandez, Arturo; 1994
39Forja en un acero microaleado grado API-X52Tesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Molina Ocampo, Arturo; 1994
40Propiedades mecanicas y de corrosion de aleaciones de magnesio solidificadas rapidamenteTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Olguin Morin, Victor Hugo; 1993
41Desarrollo de aleaciones de cobre con alta resistencia a la tension y alta conductividad electrica por solidificacion rapidaTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Botello Albarran, Armando; 1991
42Nitruracion ionica a aceros microaleadosTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Cortés Suarez, Victor Jorge; 1991
43Caracterizacion microestructural de una aleacion Al-Ti/ SiC solidificada rapidamenteTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Galicia Jimenez, Ma. Soledad; 1991
44Fabricacion de aleaciones ligeras de magnesio y sus propiedades mecanicasTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Domínguez Espinos, Octavio; 1991
45Caracterizacion microestructural de intermetalicos FeAl producidos por la tecnica de solidificacion rapida de melt spinningTesis de MaestríaJULIO ALBERTO JUAREZ ISLAS; Cardoso Meana, Victor Manuel; 1991
46Solidificacion rapida de aleaciones de Mg con alta resistencia a la tensionTesis de LicenciaturaJULIO ALBERTO JUAREZ ISLAS; Martinez Rosales, Maria del Carmen; 1990
Descargar PDF

Docencia Impartida

# Entidad Nivel Asignatura Año Semestre Alumnos
1Facultad de QuímicaLicenciaturaPROCESAMIENTO DE MATERIALES20242024-216
2Instituto de Investigaciones en MaterialesMaestríaMATERIALES METÁLICOS: SOLIDIFICACIÓN20232024-12
3Facultad de QuímicaLicenciaturaPROCESAMIENTO DE MATERIALES20232024-111
4Facultad de QuímicaMaestríaPROYECTO DE INVESTIGACIÓN I20232023-21
5Facultad de QuímicaMaestríaSESIÓN DE TUTORÍA II20232023-21
6Facultad de QuímicaLicenciaturaFUNDAMENTOS DE METALURGIA Y MATERL20232023-215
7Facultad de QuímicaLicenciaturaTRATAMIENTOS TERMICOS20232023-211
8Instituto de Investigaciones en MaterialesMaestríaMATERIALES METÁLICOS: SOLIDIFICACIÓN20232023-22
9Facultad de QuímicaMaestríaSESIÓN DE TUTORÍA I20222023-11
10Facultad de QuímicaMaestríaSEMINARIO DE INVESTIGACIÓN I20222023-11
11Instituto de Investigaciones en MaterialesMaestríaMATERIALES METÁLICOS: SOLIDIFICACIÓN20222022-21
12Instituto de Investigaciones en MaterialesMaestríaMATERIALES METÁLICOS: SOLIDIFICACIÓN20212021-22
13Instituto de Investigaciones en MaterialesMaestríaMATERIALES METÁLICOS: SOLIDIFICACIÓN20202020-21
14Facultad de QuímicaMaestríaACTIVIDADES ACADÉMICAS ORIENTADAS A LA GRADUACIÓN20202020-21
15Instituto de Investigaciones en MaterialesMaestríaMATERIALES METÁLICOS: SOLIDIFICACIÓN20192020-11
16Facultad de QuímicaMaestríaACTIVIDADES ACADÉMICAS ORIENTADAS A LA GRADUACIÓN20192020-11
17Facultad de QuímicaMaestríaSESIÓN DE TUTORÍA III20182019-11
18Facultad de QuímicaMaestríaSESIÓN DE TUTORÍA IV20182019-11
19Facultad de QuímicaMaestríaTALLER DE INVESTIGACIÓN20182019-11
20Facultad de QuímicaMaestríaPROYECTO DE INVESTIGACION I20182018-21
21Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20182018-21
22Facultad de QuímicaMaestríaSESION DE TUTORIA II20182018-21
23Facultad de QuímicaMaestríaSEMINARIO DE INVESTIGACION I20172018-11
24Facultad de QuímicaMaestríaSESION DE TUTORIA I20172018-11
25Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20142015-11
26Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20132014-11
27Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20132013-21
28Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20122013-12
29Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20112012-12
30Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20112011-21
31Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20102010-22
32Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20092010-12
33Instituto de Investigaciones en MaterialesMaestríaSOLIDIFICACION20082008-22
Descargar PDF

Patentes Otorgadas

# Título Inventores Año Sección
1ÁNODOS DE SACRIFICIO BASE ALUMINIO LIBRE HG/IN PARA LA PROTECCIÓN CATÓDICA DE ESTRUCTURAS EN AMBIENTE MARINO.JULIO ALBERTO JUAREZ ISLAS, 2010CHEMISTRY; METALLURGYELECTRICITY
2PROCESO DE FUSION-SOLIDIFICACION DE ALEACIONES COBALTO-CROMO LIBRE DE NIQUEL SOLIDIFICADAS RAPIDAMENTE PARA APLICACIONES BIOMEDICAS.ANA LAURA RAMIREZ LEDESMA, JULIO ALBERTO JUAREZ ISLAS, 2023CHEMISTRY; METALLURGY
Descargar PDF

No se encuentran registros en la base de datos de libros completos (Humanindex).

Descargar PDF

Capítulos de libros (Humanindex)

# Título del libro Título del capítulo ISBN Editorial Año Fuente